AUAV-X2 Autopilot (Discontinued)
This board has been discontinued and is no longer commercially available.
The AUAV® AUAV-X2 autopilot is based on the Pixhawk®-project FMUv2 open hardware design. It runs PX4 on the NuttX OS.
Quick Summary
- Main System-on-Chip: STM32F427
- CPU: STM32F427VIT6 ARM microcontroller - Revision 3
- IO: STM32F100C8T6 ARM microcontroller
- Sensors:
- Invensense MPU9250 9DOF
- Invensense ICM-20608 6DOF
- MEAS MS5611 barometer
- Dimensions/Weight
- Size: 36mm x 50mm
- Mounting Points: 30.5mm x 30.5mm 3.2mm diameter
- Weight: 10.9g
- Power OR-ing schematic with reverse voltage protection. 5V power module is required!
Connectivity
- 2.54mm headers:
- GPS (USART4)
- i2c
- RC input
- PPM input
- Spektrum input
- RSSI input
- sBus input
- sBus output
- Power input
- Buzzer output
- LED output
- 8 x Servo outputs
- 6 x Aux outputs
- USART7 (Console)
- USART8 (OSD)
Availability
No longer in production.
This has been superceded by the mRo X2.1. mRobotics is the
distributor for the AUAV Products from August 2017.
Key Links
Wiring Guide
Schematics
The board is documented on the Pixhawk project website.